NovaLink SL is a sealant that can be used in many settings (garages, driveways, bathrooms, ect.) but ideal for sealing around pools and
fountains – intentionally designed for especially damp conditions.* It’s self-leveling properties give you a
smooth finish that eliminates the need for tooling, will skin over within 30
minutes, and can be painted within 24 hours!
It’s rapid curing turns this sealant into a solid rubber
seal that will accommodate 25 percent joint movement.
NovaLink is solvent
free, which means it is one hundred percent solid and will NOT shrink. There is no outgassing when used on damp
surfaces – so you can use it on any damp surface, even right after a rain
shower. No need to wait! Our colors will not sun tan and
will prove color stability for years to come.
Packaging Options:
- 68
oz (2011ml) Pouch
4 pouches/carton, 45 cartons/pallet - 2
and 5 gallon pails, 20 oz sausages or 50 gallon drums available by special
order only.
*HOW CAN THIS BE USED ON DAMP SURFACES?
Its unique polyether cure chemistry allows NovaLink SL Pool
Deck Joint Sealant to be installed on damp concrete or in damp weather
conditions without "outgassing" or forming CO2 bubbles, as urethane
sealants often do.
HOW CAN THIS SAVE MONEY?
The elimination of masking tape and tooling results in a
significant reduction in labor. NovaLink SL Pool Deck Joint Sealant is solvent
free and will not shrink. Its excellent adhesion to clean masonry or concrete
allows it to be installed without a primer in most joints smaller than 1/2 inch
wide.
GREEN STANDARDS:
- Conforms
to OTC Rule for Sealants
- Meets
requirements of California Regs: CARB and SCAQMD
- Conforms
to California Proposition 65
- Conforms
to USDA Requirements for Non-food Contact
- LEED
2.2 for New Construction and Major Renovations: Low Emitting Materials
(Section 4.1) 1 Point
- NAHB
Model Green Home Building Guidelines: 5 Global Impact Points
- VOC
Content: less than 19 grams liter ASTM D2369 EPA Method 24 (tested at
240°F/115°C)
